---

---

BROTHER	CANON	COMPAQ	DELL
Choose Here LC01BK LC02BK LC21BK LC31BK	Choose Here BC-01 BC-02 BC-03 BC-10 BC-11 BC-20 BC-23 BC-30 BC-30e BC-60 BCI-3BK BCI-3eBK BCI-3ePBK BCI-5BK BCI-6BK BCI-8BK BCI-8PBK BCI-10 BCI-11 BJC-30 BJC-70 BX-02 BX-03 CLI-8BK PG-30 PG-40 PG-50 PGI-5BK	Choose Here 10N0016 12A1970 13400HC 1380620 17G0050 337714-001	Choose Here A-720 A-920 A-940 A-960 J-740 725 810 922 924 926 942 944 946 948 962 964 966 968
EPSON	HP	LEXMARK	XEROX
Choose Here S020047 S020062 S020066 S020093 S020108 S020187 S020189 T003 T013 T019 T020	Choose Here 10 11 14 15 19 20 21 26 27 29 33 38 40 45 54 56 60 61 74 88 92 94 96 98 132 564 901 920 940	Choose Here 3 4A 14A 16 17 23A 28A 32 34 36A 42A 44 50 55 70 71 75 82 1380620 13400HC 15M0850	Choose Here 8R7660 8R7879 8R7881 8R7903 8R7994

GENERAL INFORMATION
PLEASE READ THIS BEFORE REFILLING CARTRIDGES

Refill the cartridge before it is empty or the inside content is dry. It is not recommended to refill a cartridge that has been emptied for longer than 2 weeks. It is best to check the cartridge periodically and add ink. Cartridges containing a sponge may not absorb ink properly (if the sponge becomes dried out) and will cause the cartridge to leak.

Cartridge Cleaning - Soak printhead in a small amount of warm water (recommend using a shallow saucer or bottle). Remove cartridge after 5 to 10 minutes and wipe printhead clean with a water dampened paper towel. Allow printhead to dry, then install in printer and perform print cleaning cycle (see printer manufacturer's user manual).

Sponge Containing Cartridges - The sponge should be soaked with but not floating in ink. It is better to under fill slightly than to overfill the unit. Any excess ink dripping from the printhead should be cleaned off by wiping or resting the cartridge on the paper towel, however DO NOT allow the cartridge to rest for more than one minute. The cartridge will be drained of ink if the printhead is left too long on the paper towel.To avoid overfilling, stop filling when the ink just begins to surface around fill hole.

Priming - Removal of excess air that may obstruct printing operation. (3 methods: A, B or C)

1. Passive Method: Place cartridge printhead down on a folded paper towel for 20 seconds to draw out ink and equalize pressure in cartridge. DO NOT allow the cartridge to rest for more than one minute. The cartridge will be drained of ink if the printhead is left too long on the paper towel.
2. Active Method: Firmly hold the suction over the printhead and pull the plunger slowly to draw out the air from the cartridge. To confirm all excess air is removed, also draw about 1-2mL of ink.
3. Primer Page - Primer pages can be used to assist in clearing blockage in a print head, or simply for 'priming' the cartridge. The purpose is to force ink, air and blockage out of the cartridge. To create primer page, take any painting or drawing program and cover the surface of your page with a single large block of black, and then print the page. The more surface that is covered on the page the better.

All product and company names are the property of their respective owners.

© 2024 Diversified Productivity Solutions, Ltd. Disclaimer Privacy Policy

Document Created On 12/4/2024 6:49:48 PM